Configuring the Eventing Operator custom resource¶

You can configure the Knative Eventing operator by modifying settings in the KnativeEventing custom resource (CR).

NOTE: Kubernetes spec level policies cannot be configured using the Knative Operators.

Installing a specific version of Eventing¶

Cluster administrators can install a specific version of Knative Eventing by using the spec.version field. For example, if you want to install Knative Eventing v0.19.0, you can apply the following KnativeEventing CR:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  version: 0.19.0

If spec.version is not specified, the Knative Operator will install the latest available version of Knative Eventing. If users specify an invalid or unavailable version, the Knative Operator will do nothing. The Knative Operator always includes the latest 3 minor release versions.

If Knative Eventing is already managed by the Operator, updating the spec.version field in the KnativeEventing CR enables upgrading or downgrading the Knative Eventing version, without requiring modifications to the Operator.

Note that the Knative Operator only permits upgrades or downgrades by one minor release version at a time. For example, if the current Knative Eventing deployment is version 0.18.x, you must upgrade to 0.19.x before upgrading to 0.20.x.

Configuring Knative Eventing using ConfigMaps¶

The Operator manages the Knative Eventing installation. It overwrites any updates to ConfigMaps which are used to configure Knative Eventing. The KnativeEventing CR allows you to set values for these ConfigMaps by using the Operator.

All Knative Eventing ConfigMaps are created in the same namespace as the KnativeEventing CR. You can use the KnativeEventing CR as a unique entry point to edit all ConfigMaps.

Knative Eventing has multiple ConfigMaps that are named with the prefix config-. The spec.config in the KnativeEventing CR has one <name> entry for each ConfigMap, named config-<name>, with a value which will be used for the ConfigMap data.

Setting a default channel¶

If you are using different channel implementations, like the KafkaChannel, or you want a specific configuration of the InMemoryChannel to be the default configuration, you can change the default behavior by updating the default-ch-webhook ConfigMap.

You can do this by modifying the KnativeEventing CR:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  config:
    default-ch-webhook:
      default-ch-config: |
        clusterDefault:
          apiVersion: messaging.knative.dev/v1beta1
          kind: KafkaChannel
          spec:
            numPartitions: 10
            replicationFactor: 1
        namespaceDefaults:
          my-namespace:
            apiVersion: messaging.knative.dev/v1
            kind: InMemoryChannel
            spec:
              delivery:
                backoffDelay: PT0.5S
                backoffPolicy: exponential
                retry: 5

NOTE: The clusterDefault setting determines the global, cluster-wide default channel type. You can configure channel defaults for individual namespaces by using the namespaceDefaults setting.

Setting the default channel for the broker¶

If you are using a channel-based broker, you can change the default channel type for the broker from InMemoryChannel to KafkaChannel, by updating the config-br-default-channel ConfigMap.

You can do this by modifying the KnativeEventing CR:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  config:
    config-br-default-channel:
      channelTemplateSpec: |
        apiVersion: messaging.knative.dev/v1beta1
        kind: KafkaChannel
        spec:
          numPartitions: 6
          replicationFactor: 1

Private repository and private secrets¶

The Knative Eventing Operator CR is configured the same way as the Knative Serving Operator CR. See the documentation on Private repository and private secret.

Knative Eventing also specifies only one container within each Deployment resource. However, the container does not use the same name as its parent Deployment, which means that the container name in Knative Eventing is not the same unique identifier as it is in Knative Serving.

List of containers within each Deployment resource:

Component	Deployment name	Container name
Core eventing	`eventing-controller`	`eventing-controller`
Core eventing	`eventing-webhook`	`eventing-webhook`
Eventing Broker	`broker-controller`	`eventing-controller`
In-Memory Channel	`imc-controller`	`controller`
In-Memory Channel	`imc-dispatcher`	`dispatcher`

The default field can still be used to replace the images in a predefined format. However, if the container name is not a unique identifier, for example eventing-controller, you must use the override field to replace it, by specifying deployment/container as the unique key.

Some images are defined by using the environment variable in Knative Eventing. They can be replaced by taking advantage of the override field.

Download images in a predefined format without secrets¶

This example shows how you can define custom image links that can be defined in the KnativeEventing CR using the simplified format docker.io/knative-images/${NAME}:{CUSTOM-TAG}.

In the example below:

The custom tag latest is used for all images.
All image links are accessible without using secrets.
Images are defined in the accepted format docker.io/knative-images/${NAME}:{CUSTOM-TAG}.
Push images to the following image tags:

Deployment	Container	Docker image
`eventing-controller`	`eventing-controller`	`docker.io/knative-images/eventing-controller:latest`
	`eventing-webhook`	`docker.io/knative-images/eventing-webhook:latest`
`broker-controller`	`eventing-controller`	`docker.io/knative-images/broker-eventing-controller:latest`
	`controller`	`docker.io/knative-images/controller:latest`
	`dispatcher`	`docker.io/knative-images/dispatcher:latest`

Define your the KnativeEventing CR with following content:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  registry:
    default: docker.io/knative-images/${NAME}:latest
    override:
      broker-controller/eventing-controller: docker.io/knative-images-repo1/broker-eventing-controller:latest

- `${NAME}` maps to the container name in each `Deployment` resource.
- `default` is used to define the image format for all containers, except the container `eventing-controller` in the deployment `broker-controller`. To replace the image for this container, use the `override`
field to specify individually, by using `broker-controller/eventing-controller` as the key.

Download images from different repositories without secrets¶

If your custom image links are not defined in a uniform format, you will need to individually include each link in the KnativeEventing CR.

For example, to define the following list of images:

Deployment	Container	Docker Image
`eventing-controller`	`eventing-controller`	`docker.io/knative-images/eventing-controller:latest`
	`eventing-webhook`	`docker.io/knative-images/eventing-webhook:latest`
	`controller`	`docker.io/knative-images/controller:latest`
	`dispatcher`	`docker.io/knative-images/dispatcher:latest`
`broker-controller`	`eventing-controller`	`docker.io/knative-images/broker-eventing-controller:latest`

The KnativeEventing CR must be modified to include the full list. For example:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  registry:
    override:
      eventing-controller/eventing-controller: docker.io/knative-images-repo1/eventing-controller:latest
      eventing-webhook/eventing-webhook: docker.io/knative-images-repo2/eventing-webhook:latest
      imc-controller/controller: docker.io/knative-images-repo3/imc-controller:latest
      imc-dispatcher/dispatcher: docker.io/knative-images-repo4/imc-dispatcher:latest
      broker-controller/eventing-controller: docker.io/knative-images-repo5/broker-eventing-controller:latest

If you want to replace the image defined by the environment variable, you must modify the KnativeEventing CR. For example, if you want to replace the image defined by the environment variable DISPATCHER_IMAGE, in the container controller, of the deployment imc-controller, and the target image is docker.io/knative-images-repo5/DISPATCHER_IMAGE:latest, the KnativeEventing CR would be as follows:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  registry:
    override:
      eventing-controller/eventing-controller: docker.io/knative-images-repo1/eventing-controller:latest
      eventing-webhook/eventing-webhook: docker.io/knative-images-repo2/eventing-webhook:latest
      imc-controller/controller: docker.io/knative-images-repo3/imc-controller:latest
      imc-dispatcher/dispatcher: docker.io/knative-images-repo4/imc-dispatcher:latest
      broker-controller/eventing-controller: docker.io/knative-images-repo5/broker-eventing-controller:latest
      DISPATCHER_IMAGE: docker.io/knative-images-repo5/DISPATCHER_IMAGE:latest

Download images with secrets¶

If your image repository requires private secrets for access, you must append the imagePullSecrets attribute to the KnativeEventing CR.

This example uses a secret named regcred. Refer to the Kubernetes documentation to create your own private secrets.

After you create the secret, edit the KnativeEventing CR:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  registry:
    ...
    imagePullSecrets:
      - name: regcred

The field imagePullSecrets requires a list of secrets. You can add multiple secrets to access the images:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  registry:
    ...
    imagePullSecrets:
      - name: regcred
      - name: regcred-2
      ...

Configuring the default broker class¶

Knative Eventing allows you to define a default broker class when the user does not specify one. The Operator provides two broker classes by default: ChannelBasedBroker and MTChannelBasedBroker.

The field defaultBrokerClass indicates which class to use; if empty, the ChannelBasedBroker is used.

The following example CR specifies MTChannelBasedBroker as the default:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  defaultBrokerClass: MTChannelBasedBroker

System resource settings¶

The KnativeEventing CR allows you to configure system resources for Knative system containers.

Requests and limits can be configured for the following containers:

eventing-controller
eventing-webhook
imc-controller
imc-dispatcher
mt-broker-ingress
mt-broker-ingress
mt-broker-controller

To override resource settings for a specific container, you must create an entry in the spec.resources list with the container name and the Kubernetes resource settings.

For example, the following KnativeEventing CR configures the eventing-webhook container to request 0.3 CPU and 100MB of RAM, and sets hard limits of 1 CPU, 250MB RAM, and 4GB of local storage:

apiVersion: operator.knative.dev/v1alpha1
kind: KnativeEventing
metadata:
  name: knative-eventing
  namespace: knative-eventing
spec:
  resources:
  - container: eventing-webhook
    requests:
      cpu: 300m
      memory: 100Mi
    limits:
      cpu: 1000m
      memory: 250Mi